■HQ系列是一款高效穩定的CLASS D專業功放,與之前產品相比較,它的音色有突破性的改善,帶給您全新的聲音,低音厚實飽滿,中高頻通透清晰。
■采用高效穩定的R-SMPS供電系統,集成有源功率因數校正電路(PFC),讓功放具有更高的可靠性和可控性。能夠根據交流電壓波形調整電流波形,適用全球電壓(90V-260V)范圍工作,同時使得單個標準電流斷路器能夠承載更大的功率。完善的保護系統,有效減少因使用不當造成的損壞,進一步提高功放品質穩定性。
■可用在劇場以及戶外演出。
■HQ10/HQ13/HQ15/HQ18是四通道開關電源功放系列的旗艦產品。功放行業最先進的技術,超過15年的技術工程研發,使得擁有兩個機架單元功放的HQ系列能夠輸出巨大的功率密度,讓客戶得到最極致的音效體驗(最高功率HQ18,每個頻道2800W@2Ω)。
■穩壓開關電源和 Class I 電源模塊的應用,使HQ功放系列成為在世界巡回?cái)U(kuò)音應用中四通道中音響的標桿。
HQ-2系列參數
型號 | 同時帶載的輸出功率 | 橋接功率 | ||
8Ω | 4Ω | 8Ω | 4Ω | |
HQ2.10 | 1000W×2 | 1500W*×2 | 3000W* | 3500W* |
HQ2.13 | 1300W×2 | 2000W×2 | 4000W* | 4100W* |
HQ2.15 | 1500W×2 | 2450W*×2 | 4750W* | 5750W* |
HQ2.20 | 2050W×2 | 3550W*×2 | 7000W* | 7900W* |
HQ2.25 | 2500W×2 | 3900W*×2 | 7600W* | 8800W* |
HQ2.29 | 2900W×2 | 4500W*×2 | 8600W* |
HQ-4系列參數
型號 | 同時帶載的輸出功率 | 橋接功率 | ||
8Ω* | 4Ω** | 8Ω** | 4Ω** | |
HQ10 | 1000W×4 | 1950W×4 | 2200W×2 | 2200W×2 |
HQ15 | 1300W×4 | 2300W×4 | 2600W×2 | 2600W×2 |
HQ18 | 1500W×4 | 2400W×4 | 2400W×2 | 2600W×2 |
備注:
1、*,此功率是使用40ms脈沖1KHz正弦波在1%總諧波失真下測量得出。
2、**,此功率是使用20ms脈沖1KHz正弦波在1%總諧波失真下測量得出。
3、普聞祥音公司保留對以上參數的解釋權,參數有所變動恕不另行通告,最后參數以產品說明書為準。
Remark:
1、*,The power is tested under the condition of 40ms burst,1KHz sine wave and 1%THD.
2、**,The power is tested under the condition of 20ms burst,1KHz sine wave and 1%THD.
3、SOUNDSTANDARD reserves the right to make changes in specification without prior notice.The final specification is subject to the user manual.
備注:
1、*,此功率是按照EIA標準測量得出。
2、**,此功率是使用40ms脈沖1KHz正弦波在1%總諧波失真下測量得出。
3、普聞祥音公司保留對以上參數的解釋權,參數有所變動恕不另行通告,最后參數以產品說明書為準。
Remark:
1、*,The power is tested under EIA standard.
2、**,The power is tested under the condition of 40ms burst,1KHz sine wave and 1%THD.
3、SOUNDSTANDARD reserves the right to make changes in specification without prior notice.The final specification is subject to the user manual.
HQ-2系列參數
型號 | 同時帶載的輸出功率 | 橋接功率 | ||
8Ω | 4Ω | 8Ω | 4Ω | |
HQ2.10 | 1000W×2 | 1500W*×2 | 3000W* | 3500W* |
HQ2.13 | 1300W×2 | 2000W×2 | 4000W* | 4100W* |
HQ2.15 | 1500W×2 | 2450W*×2 | 4750W* | 5750W* |
HQ2.20 | 2050W×2 | 3550W*×2 | 7000W* | 7900W* |
HQ2.25 | 2500W×2 | 3900W*×2 | 7600W* | 8800W* |
HQ2.29 | 2900W×2 | 4500W*×2 | 8600W* |
HQ-4系列參數
型號 | 同時帶載的輸出功率 | 橋接功率 | ||
8Ω* | 4Ω** | 8Ω** | 4Ω** | |
HQ10 | 1000W×4 | 1950W×4 | 2200W×2 | 2200W×2 |
HQ15 | 1300W×4 | 2300W×4 | 2600W×2 | 2600W×2 |
HQ18 | 1500W×4 | 2400W×4 | 2400W×2 | 2600W×2 |
備注:
1、*,此功率是使用40ms脈沖1KHz正弦波在1%總諧波失真下測量得出。
2、**,此功率是使用20ms脈沖1KHz正弦波在1%總諧波失真下測量得出。
3、普聞祥音公司保留對以上參數的解釋權,參數有所變動恕不另行通告,最后參數以產品說明書為準。
Remark:
1、*,The power is tested under the condition of 40ms burst,1KHz sine wave and 1%THD.
2、**,The power is tested under the condition of 20ms burst,1KHz sine wave and 1%THD.
3、SOUNDSTANDARD reserves the right to make changes in specification without prior notice.The final specification is subject to the user manual.
備注:
1、*,此功率是按照EIA標準測量得出。
2、**,此功率是使用40ms脈沖1KHz正弦波在1%總諧波失真下測量得出。
3、普聞祥音公司保留對以上參數的解釋權,參數有所變動恕不另行通告,最后參數以產品說明書為準。
Remark:
1、*,The power is tested under EIA standard.
2、**,The power is tested under the condition of 40ms burst,1KHz sine wave and 1%THD.
3、SOUNDSTANDARD reserves the right to make changes in specification without prior notice.The final specification is subject to the user manual.